Lot #23: Wagner 705 Power Steamer

The Wagner Power Steamer 705 is a 1500W tool designed for chemical-free wallpaper removal. It features a large 1-gallon reservoir that provides approximately 70 to 75 minutes of continuous steam. Quick Start Guide Fill: Fill the 1-gallon container with water. While tap water can be used, distilled water is highly recommended to prevent mineral buildup and extend the tool's life. Assemble: Insert the steam hose into the unit and turn it clockwise (approx. 130) to lock. Hand-tighten the locking nut, ensuring not to cross-thread it. Connect the other end of the hose to the steam plate and hand-tighten. Heat Up: Plug the power cord into a standard outlet. The unit lacks an on/off switch and begins heating immediately. It typically takes 12–15 minutes to produce steam. Tip: Using hot tap water can reduce this wait time to about 5 minutes. How to Use for Wallpaper Removal Preparation: Use a scoring tool to gently perforate the wallpaper in a crisscross pattern to help steam penetrate. Application: Once steam is flowing, hold the steam plate flat against a section of wallpaper for about 10 seconds. Removal: Move the plate to the next section and use a scraper or putty  tool to peel away the loosened paper Important Safety & Maintenance Drip Warning: Sizable pools of water may come out of the hose before the steam starts; keep a towel ready. Refilling: Never operate the steamer when empty. To refill, unplug the unit and let it cool for at least 2 minutes before slowly removing the hose. Descaling: If mineral buildup occurs, flush the tank with a mixture of 8oz vinegar and 8oz water, let it sit for 30 minutes, then rinse thoroughly. Complete inbox fully functional Pickup category timeslot {A}