Antique (1880&#39;s 1890&#39;s Canadian pine 2-piece &#34;flat-to-the-wall&#34; kitchen stepback cupboard. It features a classic 19th-century Canadiana country design, crafted using traditional square nail construction and showcasing a beautiful honey-toned pine wood finish.Two-Piece Configuration: The hutch splits into a glazed top display case and a solid base cabinet for easier transport. Upper Section: Multi-pane dual glass doors revealing interior display shelving, flanked by 3 small pull-out accessory drawers along the waist.Lower Base: Includes two larger utility drawers sitting above a spacious, double-door bottom cupboard with classic recessed panels and simple wooden turn knobs, There is no photo of the back but it is very old and square nail construction, original bubbled glass etc. 
Dimensions:
88&#34; x 55 1/2&#34; x 20&#34;
Pickup category timeslot {A}

Antique Canadian Pine Flat to The Wall Cupboard

Two matching Canadian mid-century modern chests from Peppler’s “Hanover Line,” circa 1960s. Includes a four-drawer highboy and three-drawer dresser, featuring figured walnut veneer, minimalist recessed/scooped drawer pulls and tapered legs. Original “The Hanover Line by Pepplers” label retained. Both show surface wear consistent with age and use. Sold together as one lot.

The highboy is definitely a documented Hanover Line model; examples describe the same four-drawer configuration, figured walnut and scooped pulls.
Dimensions:
-
Pickup category timeslot {A}

Peppler’s “Hanover Line” Mid-Century Walnut Highboy &#38; Dresser

This is a mid-century modern walnut sideboard or credenza featuring sliding cabinet doors and stacked side drawers with scooped pulls, crafted by Canadian manufacturer Kaufman Furniture
Dimensions:
30&#34; h x 57 1/2&#34; w x 18&#34; d
Pickup category timeslot {A}

Vintage MCM Walnut Credenza by Kaufman Furniture

The image shows a mid-century modern Dansk Flatware Set by Jens Quistgaard in the Variation V stainless steel pattern featuring sleek, tapered handles. Note that there are only 5 smaller forks in the photo but there are actually 6 of them.
Dimensions:
-
                
Pickup category timeslot {A}

Vintage MCM Dansk Denmark Stainless Flatware Set by Jens Quistgaard

2 large lots of SINGER knitting machines, both are complete and a Brother knitting machine as well in original box.
Dimensions:
-
Pickup category timeslot {A}

2 x SINGER Knitting Machines and Brother Knitting Machine

These are 2 complete knitting machines made in Japan and in original carrying cases, comes with book and the power supply.
Dimensions:
39&#34; length each
Pickup category timeslot {A}

2 x SINGER Memo-Matic Knitting Machines

Gallien-Krueger 1001RB Mark II bi-amp bass amplifier head, housed in a heavy-duty Gator rack case. Features active equalization, voicing filters, bi-amp outputs, effects loop and tuner output. Includes power cord. Shows surface wear, dust and signs of use from storage. Untested.
Dimensions:
-
Pickup category timeslot {A}

Gallien-Krueger 1001RB Mark II Bass Amplifier Head with Gator Rack Case

Model KH-950i, in original box. With all of the accessories and manuals and pattern books you see here. 
Dimensions:
-
Pickup category timeslot {A}

Brother Kmitting Machine in Box With Loads of Accessories and More

A Singer knitting machine and accessories, includes everything you see here.
Dimensions:
-
Pickup category timeslot {A}

Knitting Machine and Accessories

Important Canadian painting by Ivan Trevor WHEALE (Canadian, 1934–2025), Evening Near Dowling, 1967. Oil on board depicting a Northern Ontario farmstead near Dowling, Ontario. Signed lower right; signed, titled “Evening Near Dowling,” inscribed “Sudbury Ont.” and dated 1967 verso. Housed in a period frame. Approx. 44 x 33 in. overall.
Dimensions:
See photos
Pickup category timeslot {A}

Ivan WHEALE (1934–2025), “Evening Near Dowling,” 1967

Large Kienzle floor-standing grandfather clock in an Art Deco walnut case with brass dial, Roman numerals and “Tempus Fugit” crest. Presentation plaque reads “Rev. & Mrs. R.L. McTavish D.D. from King St. United Church, Oshawa, 1935.” Approximately 56&#34; high. Working, with pendulum and winding key included; key not pictured. Case shows scratches, scuffs and age-related wear.
Dimensions:
-
Pickup category timeslot {A}

1935 Kienzle Art Deco Grandfather Clock – King St. United Church Oshawa

A row of four vintage wooden folding auditorium or theater seats, all connected together in one unit, these are from the 1920&#39;s - 1930&#39;s and are quite sturdy despite some wear to the legs in spots, see photos.
Dimensions:
33&#34; x 70&#34; x 15&#34;
Pickup category timeslot {A}

Folding Auditorium of Theatre Seats 4 Connected in One

Striking vintage Mid-Century Modern combination floor lamp and side table, featuring a Jax-style tubular steel H-frame base with integrated tabletop and tall cantilevered arc lamp extending over the table. Fitted with a Guzzini-style rounded shade, giving the piece a distinctly 1960s/70s Italian Modern, Space Age and Atomic-era appearance. A sculptural multifunctional design combining lighting and furniture in one statement piece.
Dimensions:
-
Pickup category timeslot {A}

Vintage Jax Style Tubular Steel Arc Floor Lamp &#38; Table with Guzzini Style Shade

Vintage Commodore VIC-20 personal computer with original retail box, power supply and cables, together with a boxed Commodore C2N cassette unit. Also includes Commodore “An Introduction to BASIC – Part 1” software/programming set and Fuji MD1D floppy disk box. VIC-20 remains housed with its original Styrofoam packaging. Untested.
Dimensions:
-
Pickup category timeslot {A}

Vintage Commodore VIC-20 Computer System with Original Box &#38; C2N Cassette Unit

Oil on canvas board after Canadian artist Marion BOND (1903–1965), based on her composition Wharfs at Peggy’s Cove. Depicts the wharfs, fishing buildings and boats of Peggy’s Cove, Nova Scotia. Presented in a rustic weathered wooden frame. The original Bond composition is documented as an oil on canvas board dating to the 1930s–40s.
Dimensions:
-
Pickup category timeslot {A}

After Marion BOND, “Wharfs at Peggy’s Cove” Oil Painting

Working system and a big pile of games controllers etc.
Dimensions:
NTSC North America
Pickup category timeslot {A}

XBOX 360 and Games

Pair of vintage Yamaha NS-451 speakers, originally introduced in the late 1970s. Classic two-way bookshelf/floor speaker design with wood-grain cabinets and removable grilles. Both speakers have been tested and are fully working. A nice pair of vintage Yamaha hi-fi speakers for a classic stereo setup.
Dimensions:
-
Pickup category timeslot {A}

Vintage Yamaha NS-451 Speakers

2 amazing antique paintings on glass with original frames (worn).
Dimensions:
20&#34; x 24&#34; 
Pickup category timeslot {A}

Antique Reverse Painted Glass Victorian Paintings (2)

A heavy-duty, vintage steel bench vise with a weathered red finish resting on a workshop table. Features a swiveling base, heavy pipe jaws. In great working condition despite the paint splatters.
Dimensions:
13&#34; l
Pickup category timeslot {A}

Heavy Duty Steel Bench Vise

Wonderful antique reverse glass painting in original frame.
Dimensions:
20&#34; x 24 1/2&#34;
Pickup category timeslot {A}

Antique Reverse Painted Glass Victorian Painting

A signed lidded keepsake box featuring the formline artwork of renowned 
First Nations artist Clarence A. Wells (1950–2025), of the Gitxsan Clan, 
Tsimshian Nation, Port Simpson, British Columbia. Wells gained 
international recognition for his Pacific Northwest Coast designs across 
boxes, drums, prints, and silverwork. With his passing in 2025, no new 
works are being produced.
Dimensions:
-
Pickup category timeslot {A}

Clarence A Wells Signed Haida Northwest Coast Indigenous Art Wood Box Lidded

That mid-century modern expandable mahogany dining table showcases a warm honey-toned wood grain and classic tapered legs. Comes with 2 leaves and 3 matching chairs (some repair on the chairs)
Dimensions:
74&#34; x 38&#34; x 29 1/2&#34; (with 2 leaves in)
Pickup category timeslot {A}

Vintage Midcentury Table and Chairs With 2 Leaves

This vintage Forestville Clock Company mantel clock features a distinctive horizontal wooden base with a cylindrical drum-style dial housing. 
Produced during the mid-20th century (circa 1960s–1970s), often utilizing German-imported movements and cases.
Combines a polished wooden long-plank plinth with a round face displaying Roman or Arabic numerals and mechanical wind-up features, comes with key in working condition but will need servicing as it is very old.
Dimensions:
18&#34; x 6&#34; x 5&#34;
Pickup category timeslot {A}

Vintage Forestville Mantle Clock

Framed reproduction of the rare 1853 map of Port Hope, Canada West, originally surveyed, engineered and published by New York firm Wall & Forrest. Detailed historical town plan depicting streets, properties and the early layout of present-day Port Hope, Ontario. Presented framed under glass.
Dimensions:
-
Pickup category timeslot {A}

1853 Map of Port Hope, Canada West – Wall &#38; Forrest Reproduction

Port Hope (Ontario, Canada) SELLER MANAGED Estate Sale Online Auction - Stanley Drive

wheel_size

Bench-mounted grinder with 6-inch abrasive wheel on left and 6-inch wire brush wheel on right, clear adjustable eye shields, adjustable steel tool rests, cast metal housing with mounting base, front rocker power switch, Diltec specification label

Diltec 6-inch dual wheel bench grinder

Front view showing Diltec label, eye shields, stone wheel, wire brush wheel

Left side view showing stone grinding wheel, tool rest, housing

Right side view showing wire brush wheel, eye shield

Black painted cast housing, silver tool rests, transparent acrylic eye guards, combination of stone and wire brush wheels

Diltec 6-Inch Dual Wheel Bench Grinder

A dual-wheel bench grinder with adjustable eye shields, commonly used for sharpening tools, grinding metal, and deburring tasks. Dual Wheels: Equipped with two abrasive grinding wheels on opposite sides of the central motor housing. Features clear adjustable protective safety shields over each wheel to deflect sparks and debris. Built on a heavy-duty cast housing designed to sit securely on a workbench. In used yet excellent condition and in good working order.
Dimensions:
-
Pickup category timeslot {A}

Bid Date	Bid Amount
Sep 1, 2026, 3:47:59 PM UTC	$26.00
Aug 31, 2026, 12:43:24 PM UTC	$23.00
Aug 31, 2026, 12:43:13 PM UTC	$20.00
Aug 31, 2026, 12:43:14 PM UTC	$20.00
Aug 31, 2026, 12:43:04 PM UTC	$17.00
Aug 31, 2026, 12:43:04 PM UTC	$14.00
Aug 30, 2026, 8:10:42 PM UTC	$11.00
Aug 30, 2026, 8:10:23 PM UTC	$10.00
Aug 30, 2026, 8:10:24 PM UTC	$10.00
Aug 30, 2026, 8:09:54 PM UTC	$9.00
Aug 30, 2026, 8:09:54 PM UTC	$8.00
Aug 29, 2026, 2:45:42 AM UTC	$6.00
Aug 29, 2026, 2:45:42 AM UTC	$5.00
Aug 25, 2026, 8:30:23 AM UTC	$2.00
Aug 23, 2026, 7:29:18 PM UTC	$1.00

Lot #173: Powerful Dual Bench Grinder Diltec 6 Inch

Only Available Pickup Date/Time: Thu, September 03 2026

Category A: 03:00 PM - 07:15 PM

Pickup Location: Stanley Drive, Port Hope, ON, L1A 3W6 View Map (opens in new window)

Lot #173: Powerful Dual Bench Grinder Diltec 6 Inch

Questions and Answers

Auction Details

Only Available Pickup Date/Time: Thu, September 03 2026

Category A: 03:00 PM - 07:15 PM

Pickup Location: Stanley Drive, Port Hope, ON, L1A 3W6 View Map (opens in new window)

Bid History

Terms & Conditions