- Heavy-duty, vintage General Electric AC electric motor built as a dual-purpose benchtop utility tool. 
- Features a solid black cast-iron housing and is mounted to a sturdy wooden riser block. It comes pre-configured as a work station with a grinding stone for sharpening tools alongside a soft buffing wheel for polishing tasks.
- Specifications: 1/4 HP, 1725 RPM, single phase, 110V AC power
- This unit was manufactured in the 1930s to 1940s. General Electric produced these specific &#34;Type KSA&#34; heavy cast-iron utility motors as durable, across-the-line workshop workhorses during the pre-WWII and wartime eras.
- Vintage, pre-owned condition with classic surface patina, light cosmetic rust, and weathering consistent with age. Features a durable heavy-gauge power cable. Sold as-is.
- Tested and works.

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2140G
Pickup category timeslot {A}

Vintage General Electric 1/4 HP AC Motor – Type KSA Bench Grinder / Buffer Combo

- Antique cast iron hand-operated water well pump manufactured by the renowned James Smart Mfg. Co. Ltd. in Brockville, Ontario, 
- This heavy-duty pump features embossed lettering on its bulbous air chamber reading: &#34;JAMES SMART MFG. CO. LTD. BROCKVILLE ONT.&#34;.
- It comes finished in a classic industrial green paint, showing a desirable aged patina with minor surface rust spots that highlight its authentic vintage character. 
- The piece retains its original curved pump handle, spout assembly with threaded hose connection, and mounting flanges. The mechanical plunger rod is still visible and attached internally.
- Antique 1881 -1912
- Good antique condition, structurally intact with moving parts. 
- Dimensions: 19&#34;W x 26&#34;H

NOTE: the pump is very heavy, recommend 2 people to carry it.

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2149G
Pickup category timeslot {A}

 Antique James Smart Mfg. Co. Cast Iron Hand Water Well Pump 

- Antique 1920s, heavy-duty cast iron cistern &#34;pitcher&#34; hand pump manufactured by the renowned James Smart Manufacturing Co.. 
- This pump features its original structural elements, including the classic curved operating handle, top-piston rod, open pouring spout, and an intact circular floor-mounting flange base.
- The top cap proudly displays the raised embossed lettering: &#34;SMART&#39;S BROCKVILLE&#34;. 
- The lower base also retains a rare partial remnant of its original circular &#34;Made in Canada&#34; manufacturer&#39;s sticker decal.
- The pump exhibits a beautiful weathered patina with flaking pinkish-brown and dark green paint layers over oxidized iron. The handle moves freely. No cracks or major damage detected in the main casting.
- Dimensions: 11&#34;W x 22&#34;H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2163G
Pickup category timeslot {A}

Antique Cast Iron Pitcher Hand Water Pump – Smart, Brockville Ont.

- Antique water heater features a heavy, beautifully detailed cast iron cylinder casing with a hinged front door panel. 
- The front face is decorated with an embossed maple leaf emblem, geometric framing, and a circular venting pattern at the base.
- When opened, the original, massive nested copper heating coil assembly is fully exposed on the interior. 
- The unit includes its original galvanized pipe extensions, brass unions, and bottom plumbing fittings.
- Antique 1900–1920
- Good antique condition, the cast iron surfaces show authentic age-related rust and patina. The door hinges and latch are present. No cracks observed in the primary cast panels.
- Dimensions: 11&#34;W x 50&#34;H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2152G
Pickup category timeslot {A}

Antique Cast Iron &#38; Copper Coil Tankless Water Heater – Early 1900s Industrial

- Antique watering can features a classic cylindrical body made of heavy-gauge sheet metal, wrapped in a uniform, rich oxidized surface patina. 
- Designed for heavy-duty farm or garden use, it includes a robust top overhead handle, a rear helper grip, a reinforced straight spout, and a functional hinged lid with its original small round finial knob.
- The interior remains structurally solid, and the flat bottom provides excellent stability. 
- Antique 1880–1920
-  Excellent structural primitive condition with an all-over weathered rust patina. The hinged lid functions properly. No major structural punctures or crushes.
- Dimensions: 20&#34;W handle to spout, 9&#34;diameter base, 15&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2156G
Pickup category timeslot {A}

Antique Heavy-Gauge Metal Farmhouse Watering Can / Pail with Hinged Lid

- This antique National Cash Register was made in 1924. According to official NCR production logs, serial number 2220896 was shipped early in the year, shortly after the company passed the 2,200,000 milestone on January 24, 1924.
- Manufactured by The National Cash Register Co. of Canada, Ltd., the register is constructed of sheet steel, and displays a worn &#34;Brown Mahogany&#34; veneer.
- This mechanical detail-adder features a single-tier keyboard with 14 unique price keys ranging from 5 up to 1, alongside its original functional paper &#34;No Sale&#34; and &#34;90&#34; pop-up indicator flags. 
- The wooden cash drawer is structurally intact, divided into standard currency and coin compartments, and features one original metal bill-weight clips. 
- Antique, pre-owned condition. Displays an authentic layer of surface patina, minor oxidation, and wear to the original painted finish consistent with a century of use. The original &#34;National&#34; front script decal and the Canadian manufacturing badge along the bottom edge remain visible. Keys and internal mechanics are present and unrestored; the drawer unlatches smoothly. Sold as-is
- Dimensions: 9.25&#34;W x 16&#34;D x 16.5&#34;H

NOTE: cash register is heavy

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2170G
Pickup category timeslot {A}

Antique 1924 National Cash Register (NCR) – Model 211,  &#34;Candy Store&#34; Detail Adder

- An original Butler Model 100 liquid-fuel blowtorch, vintage 1950s.
- Manufactured by Butler Metal Products in Preston, Ontario
- Historically used by plumbers for melting lead and welding cast iron pipes
- This unit features a solid brass fuel cylinder, a black cast iron burner assembly, the original pump mechanism, and its distinctive vibrant red wooden handle. 
- The original paper label is partially intact on the front face of the canister.
- Good vintage condition with a rich, authentic aged patina. The wooden handle is structurally solid with only minor surface paint wear. The metal housing shows a natural layer of surface rust and oxidation consistent with its age. The mechanical parts move, but it has not been tested for functionality. Sold as is
- Dimensions: 7.5&#34;L x 4.5&#34;W x 8&#34;H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2171G
Pickup category timeslot {A}

 Vintage Butler Model 100 Brass Blowtorch – Made in Canada C. 1950s

- Authentic turn-of-the-century (1910) cast iron domestic water heater tank stand. 
- This heavy-duty architectural salvage piece features an ornate, stylized pedestal stem with classical decorative detailing, tapering down to a sturdy flared circular base. 
- The top rim includes integrated support bracing designed to hold substantial weight.
- Features an embossed maker&#39;s/foundry logo mark on the top surface of the circular base ring.
- Excellent antique condition with a natural aged patina. Displays light surface oxidation and honest wear consistent with age. 
- Dimensions: 12.5&#34;diameter, 18.5&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2155G
Pickup category timeslot {A}

Antique Industrial Cast Iron Water Tank Stand / Steampunk Pedestal – c. 1910

- Authentic vintage 3-blade bronze marine propeller manufactured by the renowned William Kennedy & Sons Ltd. in Owen Sound, Ontario. 
- This piece features a classic heavy bronze construction with a fantastic aged patina 
- Vintage 1935–1950
- Diameter: 19 Inches (Stamped D19)
- Pitch: 18 Pitch (Stamped 18P)
- Rotation: Right-Hand / Clockwise Rotation (Stamped 58R)
- Production markings full sequence reads &#34;D19-18P&#34; and &#34;95 58R&#34;
- Good vintage condition with natural surface weathering, minor oxidation, and a rich, authentic coloration. Blade edges are free from major impacts or severe chips. Keyway slot is intact and clean.

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2145G
Pickup category timeslot {A}

Vintage Wm. Kennedy &#38; Sons Bronze 3-Blade Boat Propeller

- Vintage Michigan Wheel 3-blade bronze inboard boat propeller. 
- Heavy-duty Marine Bronze
- Diameter: 22 inches
- Pitch: 20 inches
- Rotation: Left Hand (LH) / Counter-Clockwise
- Hub Type: Straight keyed bore for standard shaft mounting
- Explicitly stamped 22 LH 20, Part/Serial No. 4267LH, along with DYNAMIC BALANCE factory stamps.
- Propeller was manufactured in September 1965.
- Excellent vintage condition, shows light wear, surface patina, and minor blemishes consistent with normal marine use, but the blades remain structurally solid with no major dings or severe edge damage.

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2147G
Pickup category timeslot {A}

Michigan Wheel 3-Blade Bronze Inboard Propeller (22 LH 20)

- Vintage cast iron decorative model cannon (often referred to as an &#34;RMI&#34; pattern model) features a stepped-barrel design mounted on an ornate, stylized wheeled carriage with an elegantly curved trail handle. 
- Vintage 1970s
- Good vintage condition, natural aged patina with surface rust and oxidation
- Dimensions: 17.5&#34;L x 6&#34;H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2150G
Pickup category timeslot {A}

Vintage Antique-Style Cast Iron Model Table Artillery Cannon

- Vintage industrial/medical Boekel Scientific Model 1372 Pipette Dryer constructed from high-quality, heavy-gauge cylinder stainless steel, this unit features a wide weighted base, integrated toggle power switch, and a red indicator light at the front. 
- The top includes a swing-away flat lid with an integrated carrying handle, inside it comes equipped with its nested wire mesh cylinder basket racks used to hold laboratory glassware during the drying cycle
- Cosmetically in good vintage condition with minor surface scuffs and wear consistent with age and lab use. The interior mesh baskets are included and in good shape. The vintage cloth-insulated electrical cord shows fraying and exposed sections near the middle. Plugged in and light turns on but not tested for full functionality. Sold as is
- Dimensions: 10&#34;diameter base, 23.5&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2139G
Pickup category timeslot {A}

 Vintage Boekel Scientific Model 1372 Stainless Steel Laboratory Pipette Dryer

- Antique, primitive 5-gallon fuel/kerosene container features its original protective wood-slat jacket, secured with tightly stitched metal rivets.
- The top of the heavy-gauge metal jug retains its authentic, raised embossed solder-set pewter placard boldly reading: &#34;THE QUEEN CITY OIL CO. – OIL – TORONTO&#34;.
- Designed for rugged transit via rail or wagonways, this piece comes complete with its original structural iron bail wire handle accented by a beautifully turned, central wooden grip handle.
- Tin/Galvanized Iron core, Wood jacket sleeve, Cast Iron handle details
- This item was made between 1890 and 1912. The Queen City Oil Co. was founded in 1882 by Samuel and Elias Rogers in Toronto. It operated under this distinct branding until it was fully absorbed and rebranded by Imperial Oil around 1913.
- Excellent primitive antique condition, untouched weathered patina with light rust, surface oxidation, and honest wear to the wood staves that enhances its historic character. The text on the metal badge remains exceptionally legible and crisp.
- Dimensions: 11&#34;diameter, 19&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2151G
Pickup category timeslot {A}

 Rare Antique Queen City Oil Co. Wood-Jacketed 5-Gallon Kerosene Can 

- Antique &#34;Beacon&#34; Cold Blast Hurricane Lantern, manufactured in Toronto, Canada by Sheet Metal Products Co. (SMP). 
- This iconic piece of Canadian history features the early embossed SMP shield logo on the front of the fount and is heavily stamped with &#34;Wind Proof&#34; and &#34;Beacon&#34; across the chimney and fuel tank.
- The lantern comes equipped with its authentic, clear glass short globe cleanly embossed with &#34;MADE IN CANADA&#34;. It retains its original wire globe guard, filler cap, and carrying bale handle. Exhibiting a gorgeous, authentic dark gray oxidized patina with light surface rust.
- Antique 1913–1927
- Pre-owned antique condition, solid metal body with genuine age-related patina and minor surface corrosion. Glass globe is intact with no major cracks or chips. 
- Dimensions: 15&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2122
Pickup category timeslot {A}

Antique Canadian SMP &#34;Beacon&#34; Wind-Proof Cold Blast Lantern

- Authentic vintage cast iron pitcher hand water pump. This heavy-duty, classic piece of Americana features crisp embossed lettering reading &#34;PATENTED 1941&#34; along the rim, with model markers &#34;No 2&#34;, &#34;P 882&#34;, and &#34;15512&#34; clearly legible down the main cylinder.
- Equipped with its original long curved handle and distinct pouring spout, this pump retains a gorgeous, naturally weathered brown patina and light surface rust 
-  Vintage good condition. Shows authentic weathering, surface rust, and patina consistent with age. 
- Dimensions: 15.5&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2115G
Pickup category timeslot {A}

Vintage Fergus No. 2 Cast Iron Pitcher Hand Water Pump – Patented 1941

- Highly detailed antique French-style plaster sculpture depicting a noble 17th-century gentleman or musketeer. 
- The piece is cast in solid plaster / chalkware and expertly hand-finished with a multi-toned metallic paint layer, capturing the look of traditional patinated bronze and silver. 
- The figure stands on an integrated tiered circular base decorated with an embossed scroll cartouche plaque on the front rim.
- Antique early 1900s
- Good antique condition for plaster ware. Shows character-defining surface wear, minor paint rubbing, and small chips exposing the light plaster underneath, which is typical for pieces of this age and medium. 
- Dimensions: 9&#34;W x 23&#34;H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2097
Pickup category timeslot {A}

Antique French-Style Painted Plaster Figure of a 17th-Century Cavalier

- An authentic, antique two-blade &#34;weedless&#34; design boat propeller. 
- Cast from heavy manganese bronze, this vintage propeller features beautifully swept-back, flared blades engineered to cut through heavy vegetation in shallow waters.
- It features an integrated keyed central hub shaft with stamped markings legible on the side. 
- Left unpolished, it boasts an incredible, genuine weathered patina with hints of verdigris that only comes from decades of exposure and age.
- Antique 1930s
- Good antique condition. Structurally sound with no severe cracks or major blade fractures. Shows authentic surface oxidation, minor scuffs, and pitting consistent with age and maritime use.

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2107
Pickup category timeslot {A}

Antique 1930s 2-Blade Bronze Weedless Boat Propeller 

- Beautifully preserved, authentic vintage 1955 3-blade bronze boat propeller manufactured by the Federal Propeller Company.
- Stamps: 13 RH 12 indicates a 13-inch diameter with a 12-inch pitch and Right-Hand (clockwise) rotation, F1466 - the original factory part/casting model design number, A 12 - production line batch/inspector mark.
- Excellent vintage condition with a gorgeous, undisturbed aged bronze patina. The blades are structurally sound and remarkably clean, with smooth edges and no significant chewing, dents, or impact distortion from rocks. There is minor superficial surface oxidation and texturing consistent with its age, has some white paint splatter on it. 

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2106
Pickup category timeslot {A}

Vintage 1955 Federal 3-Blade Bronze Boat Propeller – 13 RH 12 

- Vintage 3-blade bronze boat propeller manufactured by the renowned Michigan Wheel Co. in Grand Rapids, Michigan. 
- Features the distinct factory stampings: &#34;13LH12&#34; (signifying a 13-inch diameter, Left-Hand rotation, and 12-inch pitch) along with the iconic &#34;Dynamic Balance&#34; banner logo and the serial batch number F1467 on the reverse side of the hub.
- Dated exactly to November 1964 (1164), this propeller displays a gorgeous, authentic aged patina with light green verdigris spots, highlighting its decades of history. The blades show typical minor signs of wear but remain structurally solid with no major cracks or structural compromises. Has some white paint splatter on it

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#2105
Pickup category timeslot {A}

Vintage November 1964 Michigan Wheel Co. 3-Blade Bronze Boat Propeller – 13LH12

- Vintage studio art glass pear paperweight featuring a distinctive bullicante (controlled bubble) technique within heavy, clear glass. 
- It is topped with a detailed, cast-brass stem and a textured leaf.
- Vintage 1970s - 1980s
- Excellent vintage condition. No chips or cracks in the glass. Natural aged patina on the metal elements.
- Dimensions: 2&#34;diameter x 4&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#1879
Pickup category timeslot {A}

Vintage Bullicante Clear Art Glass Pear Paperweight with Metal Brass Leaf and Stem

- Vintage studio art glass apple paperweight featuring a distinctive bullicante (controlled bubble) technique within heavy, clear glass. 
- It is topped with a detailed, cast-brass stem and a textured leaf.
- Vintage 1970s - 1980s
- Excellent vintage condition. No chips or cracks in the glass. Natural aged patina on the metal elements.
- Dimensions: 2.75&#34;diameter x 3.5&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#1880
Pickup category timeslot {A}

Vintage Bullicante Clear Art Glass Apple Paperweight with Metal Brass Leaf and Stem

- Solid brass miniature field cannon serves both as a decorative military-style desk ornament and a functional smoking accessory.
- The trailing carriage frame acts as a styled handle leading back to an integrated grid-style ashtray bowl complete with dual <span class"bg-warning nswreasons" id"rid-27">cig&nbsp;</span>rests. 
- For added versatility, the wheel axle assembly separates entirely from the main frame, allowing the piece to be easily lifted and cleaned.
- Vintage 1950s–1970s
- Good vintage condition with a warm, natural aged patina. No major dents or structural breaks. Removable wheel carriage rests securely in place
- Dimensions: 10.5"L x 4"W x 6.25"H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#1950
                
Pickup category timeslot {A}

Vintage Mid-Century Solid Brass Miniature Field Cannon Ashtray &#38; Desk Accessory

- 3 authentic &#34;Crown&#34; brand fruit jars, proudly embossed &#34;MADE IN CANADA.&#34; Manufactured by the Dominion Glass Company, this set is explicitly date-coded on the bases for the year 1945.
- 1 Quart jar featuring a gorgeous, light sun-colored amethyst (SCA) violet hue. This natural purple tint developed over decades of historical exposure to ultraviolet sunlight reacting with manganese in the glass batch. It comes complete with its original matching zinc lid band and glass inset crown insert.
- 2 matching clear Pint jars featuring crisp, bold embossing of the Imperial Crown emblem and &#34;CROWN&#34; block lettering. Both are fitted with vintage dark metal screw lids.
- Excellent vintage condition. The glass is clear and vibrant with strong embossing. No major cracks or large chips. Normal light age-appropriate wear to the metal bands.
- Dimensions: 3&#34;diameter x 5.5&#34;H and 4&#34;diameter x 9.25&#34;H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#1994
Pickup category timeslot {A}

Trio of Vintage 1945 Canadian Crown Canning Jars – Sun-Colored Amethyst &#38; Clear Glass

- Set of novelty nautical salt and pepper shakers featuring two detailed seafarer characters, this iconic mid-century duo includes &#34;Cap&#39;n Pepper&#34; in his sharp black captain&#39;s coat and white officer cap, alongside &#34;Old Salty&#34; clad in his classic weathered orange-yellow rain slicker, hood, and smoking a pipe.
- Vintage 1960s
- Beautiful vintage condition with nice color retention. Original translucent plastic bottom stoppers are included and intact; exhibits minor scuffs, faint surface wear, and charming manufacturing marks consistent with age.
- Dimensions: 6.5&#34;tall

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#1982
Pickup category timeslot {A}

Vintage Mid-Century &#34;Cap&#39;n Pepper&#34; &#38; &#34;Old Salty&#34; Plastic  Nautical Salt &#38; Pepper Shakers Set – Made in Hong Kong

Kingston (Ontario, Canada) SELLER MANAGED Estate Sale Online Auction - Tamarac Street

production_year_range

dimensions_in_inches

print_type

subject

inscribed_artists

publisher

Mid-to-late 19th-century steel plate engraving after J.M.W. Turner, engraved by Robert Wallis, published by D. Appleton & Co., New York, uncolored image on heavy wove paper, wide untrimmed margins, 15"W x 11"H overall, age toning, foxing, margin creases, minor corner chip, reverse blank

Steel plate engraving "On the Thames" after J.M.W. Turner, engraved by Robert Wallis, published by D. Appleton & Co., 15" x 11"

Alternate full view, confirms size and margin condition

Close-up of lower left margin inscription 'J.M.W. Turner, R.A. Pinxt'

Monochrome steel-engraved river landscape on cream wove sheet, crisp detailed impression, light brown age toning, scattered fox spots, slight margin wear

Antique steel engraving "On the Thames"

- Genuine antique, mid-to-late 19th-century steel plate engraving titled &#34;On the Thames&#34;.
- The piece is inscribed &#34;J.M.W. Turner, R.A. Pinxt&#34; on the lower-left margin (indicating it was copied from an original painting by Joseph Mallord William Turner). 
- The lower-right margin is inscribed &#34;R. Wallis, Sculpt&#34;, crediting the master British engraver Robert Wallis. 
- Published in New York by the renowned firm D. Appleton & Co.
- Antique 1850–1880
- Fair to good antique condition. The main uncolored image impression remains crisp, sharp, and highly detailed. The heavy wove paper sheet exhibits natural age-toning, localized foxing spots, and minor handling wear/creasing along the wide, untrimmed margins. The top right corner has a minor chip, and the reverse side is blank with standard historical toning. Sold as is
- Dimensions: 15&#34;W x 11&#34;H

PICK UP DATES:  We are offering 2 pick up dates for your convenience, pick up on Sat Oct 17 from 10am-1pm or Wed Oct 21 from 5pm-7pm.

MS18-#3039
Pickup category timeslot {A}

Lot #79: Antique Mid-19th Century Steel Engraving "On the Thames" After J.M.W. Turner

Only Available Pickup Date/Time: Sat, October 17 2026 Category A: 10:00 AM - 01:00 PM
Day 2
Wednesday Oct 21 05:00pm-07:00pm

Pickup Location: Tamarac Street, Kingston, ON, K7M 7J2 View Map (opens in new window)

Lot #79: Antique Mid-19th Century Steel Engraving "On the Thames" After J.M.W. Turner

Questions and Answers

Auction Details

Only Available Pickup Date/Time: Sat, October 17 2026 Category A: 10:00 AM - 01:00 PMDay 2Wednesday Oct 21 05:00pm-07:00pm

Pickup Location: Tamarac Street, Kingston, ON, K7M 7J2 View Map (opens in new window)

Bid History

Terms & Conditions

Only Available Pickup Date/Time: Sat, October 17 2026 Category A: 10:00 AM - 01:00 PM
Day 2
Wednesday Oct 21 05:00pm-07:00pm