Lot #43: XDovet Airbrush Kit With Dual Action

XDOVET Upgraded 32PSI Airbrush Kit, Rechargeable Multi-Function Dual-Action Airbrush Set with Compressor for Painting Portable Air Brush Set for Makeup, Cake Decor, Model Coloring, Nail Art, TattooSpray nozzle diameter: 0.4 mmAir pressure: Constant in the range of 20-32 HPAir flow: 6-7-8-11L/minPower: 10 WMotor: DC 5 VCharging: 5 V 2 A USB Type-CCharging: 20-30 minutes normal use wroking 20 minutes21 x key, 1 x air brush1 x mini compressor1 x Ser-manual1 x 2CC coffee cup1 x 6CC Caoacity cup1 x 12CC Caoacity cup1 x 24CC Caoacity cup1 x Type-C charging cable1 x airbrush holder33-1 XDOVET airbrush paints are available in 12 colors, this design is easy to use on a daily basis, you just need to shake the paint well before use, a little rainfall will not affect the effect. Close the bottle after use to avoid drying out.This is a great entry-level colour set that opens up more possibilities for your creations!3-2 XDOVET spray gun paint is dry and waterproof, prevents cracking on the surface and ensures long-lasting results.They can be used on paper, canvas, wood, fabric, leather, plastic, metal, ceramics and most mixed media and textile surfaces. You can meet the needs of model dyeing, painting, manicure, craft dyeing, etc.3-3 XDOVET airbrush paints are made from the highest quality materials in the right proportions. Each colour has an excellent gradient.They have a smooth consistency that adapts perfectly to your spray gun, not clogged, you do not need to dilute the paint with water, and they are easy to clean with soap and water.45Cleaning and maintenance methods:1. Please test airbrush kit with clear water before using pigment or paint to ensure that the airbrush is not clogged to spray normally.2. If the airbrush is not able to spray liquid, it may also be that the liquid regulation knob is too tight, please adjust the end screw. Or it may be that the nozzle is clogged. Please remove and clean the nozzle. Fill the cup with alcohol or detergent, then block the needle cover with a finger and spray. The air flows back into the nozzle to clean the paints that have remained in the airbrush. Please repeat this 2-3 times. Then please wipe off the remaining solvent. Dry the airbrush to avoid stains or rust so you can use it again.3. If you use acrylic paint, please dilute it with distilled water or with good quality commercial thinners specially made for acrylic paints.4. After each use of this airbrush, please use clean water or detergent to thoroughly clean the liquid container and nozzle in time and do not let the paint dry so that the nozzle clogs or avoid uneven spraying.5. The nozzle of this airbrush is only 0.4 mm, so it can only spray watercolour pigments, ink and properly diluted paints. If the paint or liquid is too thick, please dilute it with water or thinner (Note: The concentration of colour and thinner cannot be adjusted higher than milk).6. If the nozzle is damaged, the airbrush will not work properly, disassemble the nozzle only when it is necessary